Scope Of Delivery; Intended Use; Technical Description; Function Description - Dometic GROUP WAECO PerfectView VT 100DIG Instrucciones De Montaje Y Del Uso

VT100DIG
3

Scope of delivery

No. in
fig. 5, page 4
1
2
–
4

Intended use

The WAECO PerfectView VT100DIG radio link (item no. 9102200116) is used for the
wireless transmission of signals between the camera and the monitor for the WAECO
PerfectView reversing video systems from 2011.
5

Technical description

5.1

Function description

The radio link consists of a transmitter module and a receiver module. The two modules
can be mounted inside or outside the vehicle. They transmit pictures and sound wire-
lesssly from the camera to the monitor.
The transmitter module is preferably supplied with a voltage via the ignition plus and is
also used to supply the camera with a voltage. When connecting only with the reversing
light, the system pairing cannot be started in reverse gear.
The receiver module is powered by the monitor. The wireless signals are transmitted in
the 2.4 GHz range.
Since the system is designed merely as an additional aid for reversing, it does not relieve
you of the duty to take proper care when reversing.
NOTICE!
A
 VT100DIG transmits digital data. The data is displayed on the monitor 0.2 s
after it is recorded by the camera. Therefore, it is essential that you drive
slowly.
 If the monitor displays a yellow warning triangle, there is a fault in the picture
transmission. It is possible that the display of the camera image on the mon-
itor is delayed. Therefore the system may not be used as an aid during re-
versing in such circumstances.
EN
Quantity Description
1 Transmitter module
1 Receiver module
– Fastening material
Scope of delivery
23