Changing System Settings - Insignia NS-F20TV Guia Del Usuario

Insignia NS-F20TV Television
3 Press or
Setting up the clock automatically
• With the Auto Clock function turned on, the
time is set automatically from a digital
channel signal.
To set up the clock automatically:
1 Go to the Clock menu.
2 Press or
3 Press or
on.
4 Press or
5 Press or
time zone.
6 Press or to select DST, then press
to turn Daylight Saving Time on or off,
depending on your location.
Setting up the clock manually
• If current time setting is wrong by using the
auto clock function, reset the clock manually.
• If the television loses power, the clock setting
you have made will be cleared.
To set up the clock manually:
1 Go to the Clock menu.
2 Press or
3 Press or
off.
4 Press or
5 Press VOL+ to select AM or PM.
6 Use the number buttons to enter the current
time.
Turning the television on automatically
• The on timer function operates only if the
current time has been set.
to enter the Clock menu.
to select AUTO CLOCK.
to turn the Auto Clock function
to select ZONE.
to select your viewing area
to select AUTO CLOCK.
to turn the Auto Clock function
to select CLOCK.
www.insignia-products.com
• The television must be in standby mode for
the on timer to work.
• If the television loses power, the timer setting
is cleared.
To turn the television on automatically:
1 Go to the Clock menu.
2 Press
3 Press VOL+ to select AM or PM.
4 Use the number buttons to enter the time you
want the television to turn on.
5 Press Power
Standby mode. At the preset time, the
television turns on automatically.
Turning the television off automatically
You can set the sleep timer by using the SLEEP
button on the remote control. With every press of
this button the sleep time changes as follows:
• 0 Minute
• 5 Minutes
• 10 Minutes
• ...
• 180 Minutes
or
• 240 Minutes
For example, you would like the television to
automatically turn off in 60 minutes. Press
SLEEP repeatedly until the screen displays 60
MINUTE.
To cancel the sleep timer, press SLEEP
repeatedly until the screen displays 0 MINUTE.

Changing system settings

To change system settings:
1 With the television turned on, press MENU to
display the main menu.
2 Press
3 Press
or to select ON TIMER.
to switch the television to
or to select EXTRA.
or to enter the EXTRA menu.
13