Bionaire BSF003X Manual De Instrucciones página 5

U.K. AND IRELAND
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS.
This appliance can be used by
children aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
Unplug from the electrical outlet when
not in use, when moving the fan from
one location to another, before putting
on or taking off any parts and before
cleaning.
Ensure that the fan is switched off from
the supply mains before removing the
guard.
If the supply cord or plug is damaged, it
must be replaced by the manufacturer
or its service agent or a similarly
qualified person in order to avoid
hazard.
• To protect against electrical shock, do not
immerse the fan, plug or cord in water or spray
with liquids.
• Avoid contact with any moving parts.
• Do not operate in the presence of explosive
and/or flammable fumes.
• Do not operate fan until fully assembled with all
parts properly in place.
• To avoid fire hazard, NEVER place the cord
under rugs or any parts near an open flame,
cooking or other heating appliance.
• Do not use outdoors.
• Do not let the cord hang over the edge of a
table or counter, or come into contact with hot
surfaces.
• To disconnect from the electrical supply, grip
the plug and pull from the wall outlet. DO NOT
pull on the cord.
• Always use on a dry, level surface.
• Do not operate your fan unless the fan grilles
are properly fitted.
• This product is intended for household use
ONLY and not for commercial or industrial
applications.
• Should the fan stop working, first check the
fuse in the plug (UK only) or fuse/circuit
breaker at the distribution board is operating,
before contacting the manufacturer or service
agent.
INSTALLATION OF A PLUG (UK / IRELAND
ONLY)
If the plug is not suitable for the socket outlets in
your home, it can be removed and replaced by a
plug of the correct type.
If the fuse in a moulded plug needs to be changed,
the fuse cover must be refitted. The appliance must
not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled
and removed from the supply cord and an appropri-
ate plug fitted as detailed. If you remove the plug it
must not be connected to a 13 amp socket and the
plug must be disposed of immediately.
If the terminals in the plug are not marked or if you
are unsure about the installation of the plug please
contact a qualified electrician.
This symbol indicates that this unit is a
Class II appliance and therefore an earth
connection is not required.
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Do Not Connect
Mains Wires Here
Blue
(Neutral)
Ensure that the outer sheath of
the cable is firmly held by the cord grip
5
3A
Fuse
Brown
(Live)