Refrigerator Door - Impecca RA-2105 Manual De Usuario

STEP 5
Remove right pin assemblies from the bottoms of both the
freezer and refrigerator doors. Attach the replacement pin as-
semblies on the opposite side. These can be found in the plas-
tic bag along with the User's Manual. Use a screwdriver.
Note: Hold on to the screws as they will be needed for attaching
the new assemblies.
Freezer
Door
R
L
R
STEP 6
Place the freezer door on the bottom left hinge. Ensure that the
door is aligned horizontally and vertically. Re-attach the mid-
dle hinge to the top (left) of refrigerator door. Attach shim to
the back of hinge, align with holes and affix to the middle beam
with the saved screws. Fasten with a screwdriver.
Replace
Door
Refrigerator
Door
R
L
L
Insert
Center
Hinge
Center
Center
Hinge
Shim Hinge
–4–
STEP 7
Place the refrigerator door on the center hinge. Ensure that the
door is aligned horizontally and vertically, and that the gasket
seals on all sides before attaching the top hinge. Attach the top
hinge and shim and place the hinge cover and top cap.
Hinge Cover
Top Hinge
UNIT SPECIFICATIONS
UNIT CAPACITY: 10.2 cubic feet
WIDTH (UNIT/PACKED): 24.0/26.1 (inches)
DEPTH (UNIT/PACKED): 26.1/28.0 (inches)
DEPTH WITH DOOR OPEN:
47.75(inches)
HEIGHT (UNIT/PACKED): 59.8/62.7 (inches)
WEIGHT (NET/GROSS): 125.7/138.9 (pounds)
ERROR CODES
If LED1 and LED2 are lit: Refrigerator temperature sensor error
If LED1 and LED3 are lit: Freezer defrost sensor error
If LED1 and LED4 are lit: Ambient temperature sensor error
TECHNICAL SUPPORT
Before calling technical support, please see the troubleshoot-
ing guide below. You may also visit our website at www.im-
pecca.com for answers to Frequently Asked Questions and to
contact us.
Email: support@impecca.com
Phone: +1 866–954–4440
Web: www.impecca.com
1
Top Hinge
Shim
Top Cap