Lcd Display - Xtensions SILVER LITHIUM 5.1 Manual De Instrucciones

A: Analogue G9 output to subwoofer (L, R, SL, SR, CENTRE,
D
SUBWOOFER channels)
GB
B: Analogue stereo input (additional connection of a 2-channel stereo
source)
F
C: Input for optical S/PDIF cable (digital input)
E
D: Selector switch: for optical or coaxial S/PDIF-input
E: Input for coaxial S/PDIF cable (digital input)
I
F: DC 12V power socket (coming from subwoofer)
1. Connect the G9 output to the subwoofer using the supplied 9-pin plug
2. To connect a 2-channel stereo source, connect either cable A or B,
depending on sound source (see point 1 in the user manual) to the
"Line In" socket on the decoder.
3. Connect either the coaxial or optical S/PDIF cable to the back of the
decoder ("C" or "D") and connect it to your sound source.
4. Depending on the chosen cable, set switch (D) to "Op" (optical) or
"Co." (coaxial).
5. Connect the power supply cable from the subwoofer to socket F
(see picture above)
5. Decoder buttons
POWER: (On/off switch)
Press the button to switch the Dolby Digital system on or off. There is
a delay of around one second when the unit performs a self-test and
establishes the default settings.
MODE
This button activates the decoder's setting mode. Press the button several times
in succession until the part of the LCD display you wish to set starts blinking.
ENTER
Use this button to confirm your settings and exit the setting mode.
TEST/Up
Upwards button in setting mode or activates the test programme for the
speakers.
MUTE/Down
Downwards button in setting mode and for switching off sound from the speakers.

6. LCD display

12