Kenwood KS-2200EX Manual De Instrucciones página 5

Connections
The speaker wires and labels of speakers' back panel are color-coded to facilitate connection. Connect each wire to the matching-
colored terminal, as shown in the figure.
Be sure to turn off your amplifier before connecting or disconnecting speakers.
1. Twist wire's
Subwoofer (option)
FRONT FRONT
1. The speaker system's peak input power is indicated in the specifications. To avoid speaker damage, never run the
speakers at power levels exceeding this limit.
2. This speaker system has a nominal impedance of 8 ohms. To ensure safe and reliable operation, be sure that your
amplifier or receiver is able to work with 8-ohm speakers.
• Never short the (+) and (–) speaker wire's conductors together.
• Do not reverse L and R or (+) and (–) connections. Reversal of sides or polarities may result in unnatural, incorrectly positioned
sound.
Downloaded from: http://www.usersmanualguide.com/
conductor
(–)
CENTER SURR BACK CENTER SURR BACK SURR SURR
/SW /SW
SPEAKERS SPEAKERS
Speaker terminals
(Amplifier or receiver)
SUB SUB
WOOFER WOOFER
2. Push
Right
(+) (–)
Red
Right
(–)
3. Insert the
conductor
Front speakers
Center speaker
(+)
Green
Surround speakers
Surround back speaker
(+)
Gray
(–) (+)
Brown
4. Release
Left
➤
(–) (+)
White
Left
➤
(–) (+)
Blue
5
EN