Focus Mode - LD Systems LD MEI1000 Manual De Usuario

FOCUS MODE

(ALSO KNOWN AS DOUBLE MONO MODE)
In the stereo mode (Focus mode off)
be heard left and right over the receiver. On the receiver you can
1
adjust the balance between the input signals
In the Focus Mode (Focus mode on)
mixed and can be heard in the centre over the receiver. You can
however adjust the mixing level between the two signals
2
One common application of this feature is that a musician can
adjust the mixing level between his instrument and the rest. Keep
in mind though that in this case, an additional aux send is required
on the mixer.
3
Note: This mode only works, when the transmitter is set to
stereo and if there is a signal present on both inputs.
Proceed as follows to activate or deactivate the Focus mode:
Turn on the receiver and repeatedly press the "SET" button until
4
the display shows "FO ON"
change the mode by using the
confirm and exit the menu.
You can now use the
There are 15 Steps in each direction, the step range is as follows:
(-F, -E, -d, -C, -b, -A, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5,
6, 7, 8, 9, A, b, C, d, E, F). When set to 0, both signals can be heard
at equal levels.
SYSTEM SETUP:
, the two input signals can
1
.
2
, both input signals are
3
or "FO OFF" . You can now
1 3
or button . Press "ESC" to
or buttons to adjust the mixing level.
.
4
11