Switching Off The Alarm; Deactivating The Alarm; Maximum/Minimum Value Display [Memo]; Comfort Indicator - Trotec BZ05 Manual De Instrucciones

button once to adjust the hour
display each time by one hour,
or keep it pressed in order to
reach a particular number of
hours faster.
Press the [MODE] button again.
The alarm time is stored. A bell
symbol appears adjacent to
the set alarm time in the top-
left corner in the upper third of
the display.

4.2 switching off the alarm

Press one of the buttons on the front of the appliance in
order to switch off the alarm sound.

4.3 Deactivating the alarm

Press the [MODE] button. The alarm time appears in
the upper third of the display in place of the time. The
bell symbol indicates that the alarm is activated.
B - 5 opeRating instRuctions - Room theRmo-hygRometeR BZ 05
Press the [ADJ] button 3 times to deactivate the
alarm. The bell symbol no longer appears in the
display. The alarm is deactivated.

5.0 maximum/minimum value display [memo]

Press the MEMO button once to view the maximum va-
lues measured since the last reset. Press the MEMO but-
ton twice to view the minimum values measured since
the last reset. Press the MEMO button a third time to
return to the standard display mode. If the MEMO but-
ton is not pressed a third time, the display automatically
switches back to the standard mode after 10 seconds.

6.0 comfort indicator

If the ambient temperature lies between 20 °C and 26 °C
(68 °F ~ 78.8 °F) and the relative humidity is between 50%
and 70%, the „Comfort" symbol
If the relative humidity is higher than 70%, irrespective
of the temperature, the symbol
humidity appears.
appears on the display.
A
for excessively high
F