FAULT FINDING TABLE
Check STOP switch is in the
position I.
Control fuel level min. 25%tank
capacity.
Check air filter is clean.
Remove spark plug, dry it, clean it
and adjust it, and replace it, if
necessary.
Control and adjust the carburetor
screws if necessary.
Change fuel filter. Contact your
dealer.
Carefully follow the cutting
accessory assembly instructions.
Check metal cutting accessory is
sharp. Otherwise, contact your
dealer.
Engine still gives trouble: contact your dealer.
Engine will Engine runs badly
or looses power
not start
when cutting
•
•
•
•
The machine
runs but does
not cut well
•
•
•
•
•
A
•
•
11