Operation Indicator - Mitsubishi Electric PAR-40MAAU Manual De Instalación

6 Remote controller button functions
(4) RETURN button
(3) MENU button
(5) SELECT/HOLD
button
(1) ON/OFF button
Use to turn ON/OFF the indoor unit.
(2) Function buttons
Use to select the operation mode or to set the
temperature and fan speed on the Main display.
Use to select items on other screens.
(3) MENU button
Use to bring up the Main menu.
(4) RETURN button
Use to return to the previous screen.
(5) SELECT/HOLD button
Use to jump to the setting screen or to save the
settings.
When the Main menu is displayed, pressing this
button will enable/disable the HOLD function.

(6) Operation indicator

Stays lit during normal operation. Blinks during
startup and when an error occurs.
(7) Backlit LCD
Dot display. When the backlight is off, pressing
any button turns the backlight on and it will stay
lit for a certain period of time depending on the
screen. Performing any button operation keeps
the backlight on.
Note: When the backlight is off, pressing any
button turns the backlight on and does not
perform its function. (except for the ON/OFF
button)
(7) Backlit LCD
(2) Function buttons
F1, F2, F3, and F4 from the left
(6) Operation indicator
(1) ON/OFF button
Pressing the MENU button will bring up the Main
menu as shown below.
Operation menu *1
Timer menu *1
Energy saving menu *1
Initial setting menu *2*3
Maintenance menu *1
Service menu *2*3
*1 Refer to the Instructions Book for details.
*2 Explained in this manual.
*3 If no buttons are pressed for 10 minutes on the
initial setting screens, or 2 hours on the service
screens (10 minutes on some screens), the
screen will automatically return to the Main
display. Any settings that have not been saved
will be lost.
The available items on the menu depend on the
connected indoor unit model. For items not
described in the manuals that are enclosed with
the MA Remote Controller, refer to the manuals
that came with the air conditioning units.
– 14 –