Installation Instructions; Safety Precautions - König Electronic GAMPS3-MINIKB2 Manual De Uso

Installation instructions:

Insert 2x AAA batteries in the device at the back. You will notice the LED flashes when the device is on. The
USB dongle must be put into the USB port of the console. When the device is connected the LED stays on and
the USB dongle's LED goes on. This indicates that the keyboard is successfully synchronized with the console.
Connecting the bracket and keyboard to the controller:
a. Attach bracket to the keyboard
b. Move the bracket upwards
c. Lock the bracket in place
d. Align with the controller
e. Push the bracket over the controller as shown
f. Complete

Safety precautions:

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and
are hereby recognized as such.
Keep this manual for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for these
products.
ENGLISH
To reduce risk of electric shock, this product should ONLY be opened by an
authorized technician when service is required. Disconnect the product from
mains and other equipment if a problem should occur. Do not expose the
2