Technical Data - EINHELL TE-MS 18/210 Li - Solo Manual De Instrucciones Original

4. Technical data

Motor power supply ................................18 V d.c.
Idle speed n : ......................................3000 min
0
Carbide saw blade: ...........ø 210 x ø 30 x 1.8 mm
Number of teeth: ............................................ 40
Swiveling range: .......................... -47° / 0° / +47°
Miter cut to the left: .................................0° to 45°
Saw width at 90°: ............................ 120 x 60 mm
Saw width at 45°: .............................. 83 x 60 mm
Saw width at 2 x 45°
(double miter cut left): ....................... 80 x 34 mm
Max. cutting height: .................................. 60mm
Max. workpiece depth: ........................... 120mm
Weight: ............................................ approx. 8 kg
Laser class: ...................................................... 2
Wavelength of laser: ................................ 650 nm
Laser output: ..........................................
Protection class ......................................... III/
Minimum workpiece size: Only ever cut workpie-
ces which are big enough to clamp securely with
the clamping device – minimum length 160 mm.
This machine is equipped with a special precision
cut saw blade (cutting width 1.8 mm) for cordless
crosscut saws. If you use a di erent saw blade
with a larger cutting width, this could result in loss
of performance.
This machine is intended for use with rechargea-
ble batteries and chargers from the Einhell Power-
X family only. For the current models, please refer
to the product descriptions for the articles. These
are available online.
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L sound pressure level ..................... 91,2 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ..................... 104,2 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-mu s.
The impact of noise can cause damage to hea-
ring.
Anl_TE_MS_18_210_Li_SPK9.indb 27 Anl_TE_MS_18_210_Li_SPK9.indb 27
GB
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
-1
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level speci ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
1 mW
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
- 27 -
09.03.2020 09:22:17 09.03.2020 09:22:17