CASUALPLAY skyline Instrucciones De Uso página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 3
Hood (see illustrations 17-18)
• The pushchair comes equipped with a hood that can be fitted and removed easily.
• To remove the hood undo the two rear clips (fg. 17), open the zips on both sides and pull
the clips that fasten it to the main bars outwards (fg. 18).
Using the brake (see illustrations 19 - 20)
• The braking system works on the rear wheels.
• To put the brake on, press the lower end of the pedal (red button) (fg. 19) and to release
it press the upper end of the pedal (blue button) (fg. 20).
Adjusting the safety harness (see illustrations 21 - 23)
• Put the parking brake on.
• Check that the safety harness is open before sitting the child in the seat (fg.21).
• Sit the child in the seat, adjusting the height of the chest straps and the abdominal belt
to fit the child correctly (fg.22).
• Fasten all the components of the fastening clip: chest straps, abdominal belt and crotch
strap (fg.23).
Rain cover (fg.24)
• Fit the rain cover using the zip on the upper part of it and joining it to the front part of the
hood.
• Then fasten the lower part to the pushchair chassis using the Velcro strips.
Basket
• The basket clips onto the lower part of the chassis, to remove it simply undo the clips
and take it off.
• The maximum weight the basket can hold is 2.5 kgs.
• It is advisable to empty the basket before folding the pushchair.
Maintenace
• From time to time grease the mobile parts with a lubricating product (not grease or oil).
• Check the brakes, harness, clips and mechanisms that may become loose or suffer from
wear and tear through use.
• Clean the chassis with a damp cloth (never use abrasive or solvent products). For the
plastic parts use a sponge with warm water and a mild detergent.
• Follow the washing instructions for the textile parts of the pushchair, leave them to dry
fully before folding. Do the same if the pushchair has been exposed to wet conditions to
prevent mould from forming.
• Do not use accessories that have not been approved by the manufacturer.
12

Publicidad

Tabla de contenido
loading

Tabla de contenido