Stroller Operation; Unfolding And Folding - BOB Gear REVOLUTION FLEX Guia Del Usuario

IMPORTANT:
considerable force to securely
close the quick release lever. If
you are able to completely close
the quick release lever without
wrapping your fingers around the
fork blade and the quick release
lever does not leave a visible
imprint in the palm of your hand,
or the quick release lever spins
freely on the through axle, the
tension is not adequate. Return
the lever to the FULLY OPEN
position and turn the tension
adjusting nut a quarter turn
clockwise, then repeat the closing
process.
If the quick release lever will
not lift into the FULLY CLOSED
position, return the lever to the
FULLY OPEN position and turn
the tension adjusting nut a quarter
turn counterclockwise. Repeat the
closing process.
Front Wheel Removal
1� Open Quick Release Lever
Move the wheel's quick release
lever from the locked or FULLY
CLOSED position to the FULLY
OPEN position.
2� Remove Through Axle
Loosen the tension adjusting nut
and remove the through axle from
the front wheel and fork.
3� Remove Front Wheel
Raise the front wheel a few inches
off the ground and tap the top of
the wheel with the palm of your
hand to knock the wheel out of
the front fork.
It takes
REVOLUTION User Guide

Stroller Operation

Unfolding and Folding

Unfolding the Stroller
1� Lift Red Frame Release Handle
Keep tires on ground as stroller
swing arm begins to swing open.
NOTE: Stroller swing arm will
swing open and snap into an
open and locked position.
2� Rotate Handlebar
Lift handlebar up and back until
it snaps into locked and upright
position.
7