Festool VAC SYS SE Manual De Instrucciones página 17

Cleaning the button valve
The button valve needs to be removed prior to
cleaning.
• Use an Allen key (10) to press the button valve
[12-1] downwards.
• Turn the Allen key anticlockwise until the insert
[12-2] comes loose.
• Remove the unit consisting of the button valve,
spring and insert [12-3].
• Clean the seals.
• Screw the button valve back in.
9 Disposal
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible
recycling centre! Observe the valid national regu-
lations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
10 Accessories
Use only original Festool accessories and Festool
consumable material intended for this machine
because these components are designed spe-
cifi cally for the machine. Using accessories and
consumable material from other suppliers will
most likely affect the quality of your working
results and limit any warranty claims. Machine
wear or your own personal workload may increase
depending on the application. Protect yourself and
your machine, and preserve your warranty claims
by always using original Festool accessories and
Festool consumable material! The order numbers
of the accessories and tools can be found in the
Festool catalogue or on the Internet under "www.
festool.com".
11 Warranty
For our tools, we give warranty for material and
production defects in accordance with the locally
applicable legal provisions, but in any case for at
least 12 months. Within the EU member states,
the warranty period is 24 months (verifi cation
through invoice or delivery note).
Damage caused by the operator, natural wear,
overloading, incorrect handling or through the
use of the equipment not specifi ed in the operat-
ing manual, or damage which was known at the
time of purchase, is not covered by the warranty.
Furthermore, damage caused by the use of non-
original Festool accessories and consumable
material (e.g. sanding pads) is also excluded.
Complaints can only be recognised if the tool is re-
turned while still assembled to the supplier or an
authorised Festool Customer Service workshop.
Keep the operating manual, safety instructions,
spare parts list and purchase receipt in a safe
place. Otherwise the respective, current warranty
conditions of the manufacturer shall apply.
Note
Due to continuous research and development
work, we reserve the right to make changes to the
technical content of this documentation.
12 Declaration of Conformity
Vacuum clamping unit
VAC SYS SE 1
VAC SYS SE 2
Year of CE mark: 2007
We declare under sole responsibility that this
product complies with the following norms or
normative documents:
EN ISO 12100 in accordance with the regulations
stipulated in Directive 2006/42/EC, 2004/08/EC.
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
Festool GmbH
Wertstrasse 20
73240 Wendlingen, Germany
REACH for Festool products, their accessories
and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream users"
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products: www.festool.com/reach
17
Serial no.
493582
493587
11.01.2010