Mounting The Svc; To Mount The Svc To A Valve; Valve Box Mounting Method - Hunter SVC Instrucciones De Instalación Y Manual Del Usuario

MOUNTING THE SVC

The SVC can easily be mounted on any Hunter plastic valve.
A specially designed valve mounting clip makes installation
a snap. A protective rubber cover is provided to prevent dirt
from accumulating on the face of the SVC.
To Mount the SVC to a Valve (Figure 1)
1. Unscrew the existing solenoid from the valve.
2. Screw the Hunter DC latching solenoid (P/N 458200)
into the valve bonnet.
3. Attach the large end of the valve mounting clip to the
middle of the SVC body.
4. Snap the small end of the valve mounting clip to
the solenoid.
6
Mounting Clip
Figure 1
Along with the universal mounting clip, a mounting adapter
is also provided with the SVC. This mounting adapter
allows for alternate methods of mounting the controller
either to the side of the valve box or stake mounted within
the valve box.
Valve Box Mounting Method (Figure 2)
1. Position the universal mounting adapter on the side of
the valve box. Make sure that the bracket is positioned
so that the controller will not interfere with the valve
box cover when closed.
2. Drive two screws to secure the adapter to the side of
the valve box.
3. Attach the SVC to the mounting clip and slide it on the
end of the mounting adapter.
Mounting
Adapter
Mounting Clip
Figure 2