Kicker KMTC65 Manual Del Propietário página 5

Step 6: Secure the enclosure to the tower tube with the upper and lower mounting brackets. With the
wiring clearance hole you drilled and the wiring shroud on the lower mounting bracket lined up, position
the enclosure assembly so that it is tightly against the tower tube. Once in position, install the upper
mounting bracket using the included stainless steel socket-head cap screws. You will need to choose
the appropriate length fastener based on the size of the tower tube to which you're mounting. Ensure the
enclosure is secure by increasing the tension of the swivel lever thumbscrew attached to the swivel lever.
With the enclosure securely mounted, you may fi nish by opening the swivel lever and swiveling the
assembly left or right. When you are satisfi ed with the orientation, close the swivel lever to lock the
enclosure in place. If the enclosure is not locked tightly enough, tighten the thumbscrew.
upper mounting bracket
2A fuse
(max)
+12V
}
Ground
≤7"
(17.5cm)
12V
battery
stainless steel socket-head cap screws
(1/4" Allen wrench)
5