Battery Tool Use And Care; Service; Edger Safety Warnings; Battery And Charger - Oregon EG600 Manual De Instrucciones

• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control
• Use the power tool, accessories, and
tool bits, etc. in accordance with these
instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation

Battery Tool Use and Care

• Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack
• Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire
• When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws, or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire
• Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns

Service

Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained Attempting
to perform service or maintenance outside of
the scope of this manual or failure to perform
recommended inspection and cleaning may cause
denial of warranty claims
EG600 Multi-attachment
Important Safety Instructions

Edger Safety Warnings

DANGER: Keep hands away from blade.
Contact with blade will result in serious
personal injury.
• Keep all parts of the body away from the
cutter blade. Do not remove cut material
or hold material to be cut when blades are
moving. Make sure the switch is off when
clearing jammed material. Blades coast
after turn off. A moment of inattention while
operating the edger may result in serious
personal injury
• Keep guards in place and in working order.
• Carry the edger by the handles with the
cutter blade stopped. Proper handling of the
edger will reduce possible personal injury from
the cutter blades
• Hold the power tool by insulated gripping
surfaces only, because the cutter blade
may contact hidden wiring. Cutter blades
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock

Battery and Charger

• Use only the Oregon B Series batteries.
• Ensure the switch is in the off position
before inserting battery pack. Inserting the
battery pack into machines that have the switch
on invites accidents
• Do not charge battery in rain or in wet
locations.
• Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock
• Recharge battery only with the charger
specified by the manufacturer (Oregon C
Series chargers). A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack
• Do not dispose of the battery in a fire. The
cell may explode. Check with local codes for
possible special disposal instructions
• Do not charge other batteries on the charger.
The battery charger is suitable only for charging
7