Publicidad
Idiomas disponibles
Idiomas disponibles
Information on noise and vibration
Measured values determined according to EN 60745
The A-weighted noise level of the tool is typically:
Sound pressure level (L
Sound power level (L
Uncertainty K
Wear ear protection!
Hand-arm vibration:
Uncertainty K
Measured values determined according to EN 60745
The vibration emission level indicated in these instructions has been measured in
accordance with a standardised test method given in EN 60745 and can be used
accordance with a standardised test method given in EN 60745 and can be used
to compare one tool with another. It is also suitable for a preliminary evaluation of
to compare one tool with another. It is also suitable for a preliminary evaluation of
the vibration emission level.
The vibration emission level set out in these instructions presents the main
applications of the power tool. If the power tool is used for other applications or
applications of the power tool. If the power tool is used for other applications or
with different tools or if maintenance is not sufficient, the vibration emission level
with different tools or if maintenance is not sufficient, the vibration emission level
may vary. This may lead to a significantly higher vibration emission level during
the whole working period.
In order to be accurate, an estimation of the level of exposure to vibration should
In order to be accurate, an estimation of the level of exposure to vibration should
also take into account the times when the tool is switched off and when it is
also take into account the times when the tool is switched off and when it is
running but not actually used. This may significantly reduce the level of exposure
to vibration during the whole working period.
Additional protective measures in order to protect the operator from vibration
Additional protective measures in order to protect the operator from vibration
effects, e.g. maintenance of power tools and tools, keeping hands warm,
effects, e.g. maintenance of power tools and tools, keeping hands warm
organisation of work processes, shall be determined.
Environmental Protection
)
PA
)
WA
set out in these instructions presents the main
ly used. This may significantly reduce the level of exposure
Only for EU countries
In observance of the European Directive 2012/19/EC on
In observance of the European Directive 2012/19/EC on
waste electrical and electronic equipment and its
implementation in accordance with national law, electric
tools that have reached the end of their life must be
have reached the end of their life must be
collected separately and returned to an environmentally
collected separately and returned to an environmentally
compatible recycling facility.
UT 1200
86 dB(A)
97 dB(A)
3 dB
UT 1200
1,05 m/s²
1,5 m/s²
instructions has been measured in
antly higher vibration emission level during
equipment and its
UT 1400
86 dB(A)
97 dB(A)
3 dB
UT 1400
0,5 m/s²
1,5 m/s²
law, electric
Publicidad
