en Cleaning and servicing
Place the To-Go blade insert on
6.
the base unit and rotate in a clock-
wise direction until it locks into
place.
→ Fig.
21
Set the rotary switch to the recom-
7.
mended speed.
→ Fig.
22
Tip: Processing can also take
place with instantaneous switching.
→ "Using instantaneous switching",
Page 36
Process the ingredients until you
8.
achieve the required result.
To end the operation, set the rotary
9.
switch to .
→ Fig.
23
Closing the To-Go blender jug
Requirement: The appliance has
stopped.
Turn the To-Go blender jug anti-
1.
clockwise and remove it from the
base unit.
→ Fig.
24
Turn the To-Go blender jug and un-
2.
screw the To-Go blade insert.
→ Fig.
24
Close the mouthpiece on the lid.
3.
→ Fig.
25
Screw the lid and the To-Go
4.
blender jug in tightly.
→ Fig.
25
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
Dishwasher-safe components
Find out here which components can
be put in the dishwasher.
38
ATTENTION!
Some parts may be damaged if they
are put in a dishwasher.
Only put dishwasher-safe parts in
▶
the dishwasher.
Only use programmes that do not
▶
heat the water above 60 °C.
Do not wedge plastic parts in the
▶
dishwasher.
This overview describes the cleaning
process for the components.
→ Fig.
26
Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
Do not use cleaning agents con-
▶
taining alcohol or spirits.
Do not use sharp, pointed or metal
▶
objects.
Do not use abrasive cloths or
▶
cleaning agents.
Cleaning the base unit
WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
Never immerse the appliance or
▶
the power cord in water or clean in
the dishwasher.
Do not use steam- or high-pres-
▶
sure cleaners to clean the appli-
ance.
Wipe down the base unit with a
▶
soft, damp cloth.