DMX Reset
Display
Error Mode
Art Net Dmx
language
Default
Factory
setting
Default
Boot time
Software
Info
version
RDM UID
Fan speed
temperature
Rate
Quality
DMX LIVE
Start code
Channel [Y] X
TEST
Test LEDS
Manual
control
Service
off
on
Display sleeping
mode
No sleeping
normal
silent
shutdown
opening
Chinese
English
Loading
Total boot time
Current boot time
Reset Table X time
X.X.X
4D50:XXXXXXXX
Basic fan X RPM
LED temperature
XX Hz
0-100%
0-255
[Y] 0-255
Beam static
Beam flash
Beam close
R AURA
G AURA
B AURA
Reboot
Channel [Y]X
...
Error table
Fan clear
4
Forbid Rest by DMX
Rest by DMX
After 30 seconds, turn off the screen and press
any button to wake up
Don't turn off the screen
Any errors detected are displayed on the reset
screen
The error message is not displayed in the screen.
You need to see it in the error table.
After the shutdown, receive the control DMX512
signal
After opening, the art net signal is received, and
the control DMX512 is not received
Interface Language is Chinese
Interface Language is English
Restore all settings to factory defaults
Displays
the
total
manufacture
Displays current boot time
Counter clear→ Yes/ No Reset counter clear
Displays the current program software version
Display unique RDM ID
Displays the current speed of the basic fan 1,
NA,0-10000 RPM
Current
temperature,
temperature, historical maximum temperature
DMX transmission speed,live , In seconds
Percentage of error packets received,live
The decimal value of the DMX start code,live
Muestra valores DMX (x) en cada canal (y)
Prueba Leds blancos en baja intensidad
Prueba de LEDS blancos
LEDs blancos apagados
Prueba Leds de fondo rojos
Prueba Leds de fondo verdes
Prueba Leds de fondo Azules
Reboot fixture
Send DMX value [Y] on channel X
......
Displays any valid errors
OFF / ON stop fan
operating
time
after
last
maximum