Downloading The Sms; Satellite Radio Tuner Control (Optional); Basic Operation; Category And Channel Search - Kenwood KDC-BT742U Manual De Instrucciones

Function of KDC-BT742U
Bluetooth Setup
⁄
• The unopened message is displayed at the beginning
of the list. Other messages are displayed in the order of
reception.
• The SMS that has arrived when the cell-phone is not
linked with Bluetooth cannot be displayed. Download
the SMS.
• The short message cannot be displayed during

downloading the SMS.

Downloading the SMS
Download the short message (SMS) arrived at the
cell-phone so that it can be read on this unit.
1
Enter SMS download mode
Select "MENU" "SMS DOWNLOAD".
>
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
A message list appears.
2
Start downloading
Press the [AUD] knob.
"DOWNLOADING" is displayed.
When the downloading finishes, "COMPLETE" is
displayed.
3
Exit the SMS download mode
Press the [SEARCH] button.
⁄
• The cell-phone must be able to transmit the SMS using
Bluetooth. Setting on the cell-phone may be required.
If the cell-phone does not support SMS function, the
SMS download item in Function Control mode is not
displayed.
• When the SMS is downloaded from the cell-phone, the
unopened messages in the cell-phone are opened.
• The already-read and unread short messages can be
respectively downloaded up to 75.
32
|
KDC-BT742U/ KDC-X493/ KDC-MP442U
Satellite Radio tuner control
(Optional)

Basic Operation

Selecting Satellite Radio source
Press the [SRC] button.
Select the "SAT"/ "SIRIUS"/ "XM" display.
⁄
• You need to register to the service provider to receive
the service by Satellite Radio. Consult the service
provider if "CALL ... TO SUBSCRIBE" appears.
• The radio may take a little time to start receiving after
you select the Satellite Radio source.
• If the signal reception fails, "ACQUIRING SIGNAL"/ "NO
SIGNAL" appears.
Switching Seek Mode
For KDC-X493/MP442U: Press the [AUTO]
button.
For KDC-BT742U: Press the [AUTO] button for at
least 1 second.
Display Operation
"CHANNEL" Normal manual seeking control.
"PRESET" Search in order of the channels in the Preset memory.
Select the channel
Push the [AUD] knob towards right or left.
Selecting the Preset Band
Push the Control knob toward up.
Each time you push the knob, the preset band
alternates between the SR1, SR2, SR3 and SR4.

Category and Channel Search

Selecting the channel and category you want to
receive.
1
Enter Category and Channel Search mode
Press the [SEARCH] button.
2
Select the Category and Channel Search
Turn the [AUD] knob to select "CH SEARCH", and
then press the [AUD] knob.
3
Select the Category
Turn the [AUD] knob or push it towards up or
down.
4
Select the Channel
Push the [AUD] knob towards right or left.
Cancelling Category and Channel Search mode
Press the [SEARCH] button.