Amika 10133.3ETsKDpHbQX Manual De Instrucciones página 47

CLEANING AND MAINTENANCE
Dismounting the side racks
Ovens marked with the letter D are equipped
with easily removable wire guides (side
racks*) of oven inserts. To remove them for
washing purposes, pull the front catch (Z1),
then tilt the guide and remove it from the rear
catch (Z2). After washing the guides, put them
in the mounting holes of the oven and press
the catches (Z1 and Z2).
Z1
Dismounting the side racks
Ovens marked with the letters Dp have stain-
less steel sliding telescopic shelf supports
attached to the wire shelf supports. The
telescopic shelf supports should be removed
and cleaned with the wire shelf supports.
Before you put the baking tray on them, they
should be pulled out (if the oven is hot, pull
out the telescopic shelf supports by hooking
the rear edge of the baking tray at the front of
the telescopic shelf supports) and then slide
along with the tray.
Z2
Replacement of the oven light bulb
In order to avoid the possibility of an
electric shock ensure that the appliance
is switched off before replacing the bulb.
● Set all control knobs to the position "●"/"0"
and disconnect the mains plug,
● unscrew and wash the lamp cover and
then wipe it dry.
● unscrew the light bulb from the socket,
replace the bulb with a new one – a high
temperature bulb (300°C) with the follow-
ing parameters:
- voltage 230 V
- power 25 W
- thread E14.
Oven light bulb
● Screw the bulb in, making sure it is prop-
erly inserted into the ceramic socket.
● Screw in the lamp cover.
47