Airnatural air&me Buldair Manual De Usuario página 8

Switching on
Before switching on the appliance, check
that Buldair is unplugged.
• Remove Buldair cover and check that
there is a filter inside; a filter is pre-installed
in each appliance.
Never operate the appliance without filter!
• Put the cover back and plug the power
cord on the power supply or on USB.
• Buldair is now ready to be used.
Operating instructions
③
Power switch ( )
• Press "power" once to switch the
appliance on.
• Press "power" twice to switch the LED
light off.
• Press "power" a third time to switch
Buldair off.
Negative Ionization
Negative ionization improves air quality and
prevents from stress and anxiety.
Maintenance
• Before cleaning or replacing the filter,
unplug the appliance.
• The filter life expectancy depends of the
frequency of use and of the pollutant
concentration in the air.
• Replace the cotton and the essential oils
at least every 45 days.
• Clean with a wet soft cloth. Do not soak.
Storage
• Clean as previously recommended.
• Let the appliance dry.
• Store in a dry place, preferably in
its original
temperatures.
Caution
• Do not use solvents or abrasive products
when cleaning the appliance.
packaging. Avoid
Replacing the filter
Aromatherapy
high
Open the upper
part of the air
purifier.
Remove the used
filter.
Put the new filter
in.
Remove the
cotton located in
the polypropylen
receptacle.
Put 3 to 10
essential oil drops
on the cotton
and switch
Buldair on.
8