Basic Connections - Xoro HSD 8420 Manual De Operaciones

BASIC CONNECTIONS

Connecting to a TV
•
Ensure that the power switch of this unit and other equipment to be connected is
turned off before commencing connection.
•
Read through the instructions before connecting other equipment.
•
Ensure that you observe the colour-coding when connecting audio and video cords.
•
Please use only one kind of connection with TV set for the unit and choose correct
video output setting, otherwise there may be image distortion.
•
To get better viewing quality, you are advised using S-video cord to connect the TV
set with S-video input meanwhile changing the TV set to S-video input format.
Connecting to a stereo TV set by SCART
The Scart or Euro AV cable serves as the universal connector for picture, sound and control
signals. Plug a cable onto the SCART socket at the back of the DVD player and the SCART
IN socket on the rear side of the TV set. Please also refer to your TV sets user manual.
Switch on the TV set and select the Scart input or the respective channel number. For
channel number and input selection please also refer to your TV operating instructions.
Notes:
The Scart interface of this DVD player is RGB enable. In RGB mode, the picture quality is
much better than in standard SCART mode. You can activate RGB mode on the video
settings page of your DVD recorder, You only can use this mode if it is supported by your
TV set. Otherwise, the use of RGB will result in wrong colour display. please also refer to
your TV set's user manual.
Notes:
If you find the image like non-fully zoomed picture, or brim picture or black & white picture
ect., please select PAL or NTSC by systems settings or press the N/P button on the remote
control to switch the TV system. This DVD player is capable of supporting different scales
picture, as a result, non-full zoomed picture could appear or picture be partially covered on
users TV set.
5