Publicidad
1.2.8
Parameterbits // Parameterbits // Bits de paramètres // Bit parametri // Bits
de parámetros
Bit P0:
1: 50 Hz filter in A/D converter active
0: 60 Hz filter in A/D converter active
Bit P1:
1: normal operation
0: both channels in current mode and without broken-wire recognition
Bit P2
1: peripheral fault is indicated
0: peripheral fault is not indicated
Code-Definition
ID1
14 Bit
Kanal 1
0; 2; 3
Kanal 1+2
4; 5; 7 (Default value ID1=7)
The module can transfer either 12 or 14-bit values.
Via ID1 the data capacity and the channel number can be defined.
Zumutbare Änderungen aufgrund technischer Verbesserungen vorbehalten.
Pepperl+Fuchs GmbH · 68301 Mannheim · Telefon (06 21) 7 76-11 11 · Telefax (06 21) 7 76 27-11 11
Montageanweisung // Installation Instructions
12 Bit
1
AS-Interface
© Pepperl+Fuchs, Printed in Germany
Internet http://www.pepperl-fuchs.com
7
Publicidad
