Philips Respironics Amara SE Manual De Instrucciones página 7

Disassembly of the Mask
1. Headgear - Remove from the forehead pad support and
headgear clips.
2. Forehead pad - Slide off the track of the forehead pad
support (Figure 6).
3. Mask Cushion - Grasp and pull it off the mask frame
(Figure 7).
Assembly of the Mask
1. Forehead pad - Slide on the track of the forehead pad
Figure 6
support.
2. Mask Cushion - Use your thumbs to press the cushion
past the retaining tabs on the elbow and press into place.
(Figure 8).
3. Headgear - Thread the top straps through the forehead
pad support, and the bottom straps through the headgear
clips. Push the headgear clips onto the mask frame.
Figure 7
Figure 8
5