Sound Settings; Calling And Exiting The Audio Menu; Performing Settings In The Audio Menu - Blaupunkt San Francisco 300 Instrucciones De Manejo

Sound settings

ent interfaces, you can assign an individual
device number to every interface (see ch.
"User settings", section "Performing settings
in the user menu", "C'N'C" menu item).
Starting AUX mode
u Press the SRC button 6 repeatedly until
"CDC / AUX" appears on the display.
The playback starts.
Note:
You can enter a separate name for the rear
AUX input that is shown on the display in
AUX mode if you selected the connected au-
dio source (see ch. "User settings", section
"Performing settings in the user menu", "AUX
EDIT" menu item).
Sound settings
The following sound settings can be changed in
the Audio menu:
• Adjusting bass and treble
• Setting the left/right volume distribution (Bal-
ance) or front/rear (Fader)
• Setting the boost of bass at low volume
(X-Bass).
In the Enhanced Audio menu, you can also per-
form the following settings:
• Setting the 3-band equalizer:
– Setting the middle level
– Selecting bass, middle and treble
– Adjusting quality factor for bass and mid-
dle
• Performing advanced X-Bass settings (level
and frequency)
• Selecting equalizer presettings
Note:
The settings for bass, middle and treble are
each stored for the current audio source.
36

Calling and exiting the audio menu

u Briefl y press the AUD button A to open the
audio menu.
u
Press the button
until the desired menu item is selected.
u
Perform the setting (see the next section).
u Briefl y press the MENU•OK button ? to
select a different menu item.
- or -
u Briefl y press the DIS/ESC button = to exit
the menu.
Note:
The menu is automatically exited approx.
15 seconds after the last button activation
and you are returned to the display of the cur-
rent audio source.
Performing settings in the audio
menu
BASS
Bass level. Settings: -7 to +7.
u button > to open the sub-
Press the
menu.
u
Press the button
the setting.
TREBLE
Treble. Settings: -7 to +7.
u button > to open the sub-
Press the
menu.
u
Press the button
the setting.
BALANCE
Left/right volume distribution. Settings: L9 (left)
to R9 (right).
u button > to open the sub-
Press the
menu.
u
Press the button
the setting.
@ / 2 repeatedly
@ / 2 to perform
@ / 2 to perform
@ / 2 to perform