Tabla de contenido
Publicidad
I
RECORDING
mm
Recording methods and
connections
The INPUT jack of this unit can accept
digital signals, analog signals (line output),
and sound signal from the microphone.
According to the source signal and output
jack
of
the
connected
unit,
make
connections
properly as follows.
Connect the plugs completely.
Digits/ recording (connecting with
the optical digital output) +
High quality recording is possible since the
digital source signals from a CD, etc. are
not converted into analog signals.
The playing time and index mark data of the
TOC (Table
of contents)
are recorded
automatically
at the same time. This is
particularly useful when recording a whole
CD.
This unit can record digital signals from
DAT and BS/CS tuners as this unit has a
built-in sampling frequency rate converter.
@ Equipment
with optical square shaped
jack
@Optical
square shaped plug
@
Opti~ed
digital
~able
(supplied)
@Optical
mini-plug
@ Equipment with optical mini-jack
@Optical
digital
cable
(commercially
available)
This unit can be connected to only optical
output jacks for digital recording.
Publicidad
Tabla de contenido
