Schulz CAP10.000 Manual De Instrucciones página 41

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Fan mode
• Press Fan button to choose Fan mode, the Fan mode indicator will fl ash.
• Select the fan speed by press SPEED button or press High / Low button directly.
• The temperature can't be set.
Automatic adjusting mode
• Press Mode button to choose the automatic mode.
• Automatic mode indicator will fl ash.
• After choosing the automatic mode the running state will depend on room temperature.
• When room temperature is higher than 25°C, it will come into cool mode.
• On the contrary, it will be fan mode.
Sleep Mode (Sleep - 11)
• Press this button to activate or cancel sleep function in cooling mode
• The unit will run at the low fan speed as default with lower noise.
• The setting temperature will increase 1 degree per 2 hours running time, and it will not change after incre-
asing 2 degrees.
Max cool Mode (Max Cool - 10)
• Press this button to activate the Max cool mode.
• The unit is forced to be in high fan speed under the Max cool mode and the fan speed can't be se.
Timer mode
• When the appliance is switch off, press Timer button to set timer-on.
• Press Up or Down button to adjust time from 0 to 24 hours.
• The Timer on indicator will fl ash.
• When the appliance is running, press Timer button to set timer-off.
• Press Up or Down button to adjust time from 0 to 24 hours.
• The Time off indicator will fl ash.
2. Air conditioner of 12.000Btu/h
Timer set
• Press the Timer button when the unit is on.
• The LED will fl ash fi ve times.
• During this period press up or down button to adjust set time from 0.5h to 24h.
• It will vary 0.5h each time in 3h and 1h each time hereafter.
• The set time will fl ash 5 times after adjusting.
• When it will display temperature again. Once the set time end, the unit will turn off automatically.
Change the set time
• When Timer is on, you can check remnant time by pressing Timer Button.
• It will fl ash 5 times.
• Press Up or Down button to adjust set time.
• The set time can also be cancelled if you press the Timer button once again during the fl ashing time.
Set timer-on
• Press the Timer Button when the unit is off. Same as timer-off set.
• Once the set time end, the unit will turn on automatically
41

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cap12.000

Tabla de contenido