Siemens LI 48630 Instrucciones De Uso página 33

Fitting into wall cupboard
If the extractor hood is to be installed
further back in the cupboard, the stops
for the filter drawer can be moved
forwards.
To do this, undo the screws, move the
stops and retighten the screws.
Weight in kg:
Exhaust air
13,0
We reserve the right to construction changes within the
context of technical development.
Circulating air
13,5
Moving the operating unit:
See Operating instructions.
Attaching the handle moulding:
A handle moulding must be attached to
the filter drawer.
This handle moulding may be a wooden
strip which matches the kitchen units or a
handle moulding available as an optional
accessory (see optional accessories on the
back page).
1. Using the enclosed template
the attachment points on the wooden
strip and make holes with a bradawl.
When you drill:
2 mm dia – max. 10 mm in depth.
2. Align handle moulding and screw to the
appliance.
Do not pinch the ribbon cable.
O
, mark
III
33