Setting Clock Time; Power Saving Feature; Pace Arrow Feature; Checking Wheel Circumference And Switching Between Wheel A And B - CAMPAGNOLO ErgoBrain Manual De Uso

Setting Clock Time

Push SET button in CLK of Auto Timer screen. If KMH has been chosen
for speed scale, the clock time is in 24-hour. If MPH has been chosen, the
clock time is in12-hour.
S/S
Setting
CLK
SET
To clock time setting

Power Saving Feature

When the main unit is left without any button operation or without receiv-
ing any signal for about 15 minutes continuously, power supply is shut
down and the unit will be in sleep state, displaying only clock.
When pedaling is started again or any button is pressed, the unit wakes
up and returns to normal display. (The buttons of the Ergopower levers do
not release the power saving feature.)

Pace Arrow Feature

The pace arrow indicates whether the current speed is higher or lower
than the average speed. In the Auto Timer screen the speed is compared
with AV, and in the Stopwatch screen the speed is compared with STW-
AV (average speed in the Stopwatch function).
Checking Wheel Circumference and Switching between Wheel A
and B
Push S/S button and MODE button simultaneously in ODO of Auto Timer
screen (sub mode). The current wheel circumference is displayed. By fur-
ther holding down the two buttons, the display moves from wheel A to
wheel B.
ODO
Changing Setting
To change the current settings, push SET button in any functions other
than clock time, and the display returns to the formatting mode (page 4).
After doing necessary changes, return to the measuring display by the
press of SET button. (The clock time remains unchanged.)
MODE S/S
– +
SET
Moves from hour
digits to minute
Displays current wheel circumference
S/S MODE
Moves from wheel
S/S MODE
3sec.
MODE
– +
SET
Completes setting
to wheel
TM
- 12
UK