Publicidad
Idiomas disponibles
Idiomas disponibles
SET 5750
L. Large profile nozzle.
M. Disk nozzle with fine diamond sputtering.
N. Disk nozzle with thick diamond sputtering.
TECHNICAL DATA
Model: SET 5750
Voltage: 100-240V
Frecuence: 50/60Hz
Output voltage: 30V DC250mA
Power : 7.5W
13 speeds with 5 indicator lights :
Speed 1: 2000 rpm (1 LED light)
Speed 2: 2220 rpm
Speed 3: 2440 rpm
Speed 4: 2660 rpm (2 LED lights)
Speed 5: 2880 rpm
Speed 6: 3100 rpm
Speed 7: 3320 rpm (3 LED lights)
USING
- Connect the adapter to the appliance, then connect the adapter to the plug.
- Choose the accessory which you want, depending that you desire.
- Put the accessory on the upper support and push firmly.
- Switch on the appliance turning the ON/OFF switch from 0 position (OFF) to R position (turning to right)
or L (turning to left).
- The rotation speed can be change with speed button pushing "-" to decrease it and "+" to increase it.
- To remove the accessory simply pull it.
CLEANING AND MAINTENANCE
- Disconnect and unplug the appliance when you clean it.
- Clean the main body with a damp cloth and dry it immediately.
- Do not immerse the appliance into the water.
- When you do not use the appliance store it in its pouch.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose
of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
DECLARATION OF CONFORMITY: This device complies with the requirements of the Low Voltage Directive
2014/35/EU and the requirements of the EMC directive 2014/30/EU.
O. Cylindrical nozzle with flat top and
diamond sputtering.
P. Large conical nozzle.
Speed 8: 3540 rpm
Speed 9: 3760 rpm
Speed 10: 3980 rpm (4 LED lights)
Speed 11: 4200 rpm
Speed 12: 4420 rpm
Speed 13: 4640 rpm (5 LED lights)
8
Publicidad
