ROTHOBLAAS TOWER Manual De Uso página 23

USE
Rothoblaas TOWER - TOWER22 - TOWERA2
Homologated as a component for a type C system together with
the PATROL (consult the specific manual) safety line along EN
795/C:2012, CEN/TS 16415:2013 and UNI 11578/C:2015
for sloped and horizontal timber, concrete and steel surfaces for 4
persons equipped with PPE as per EN 361 and with the following
fall protection systems as per EN 363:
• Restraint and positioning systems (EN 358)
• Guided type fall arresters including a flexible anchor line (EN 353-2)
• Lanyards (EN 354) with energy absorber (EN 355)
• Retractable fall arrest devices (EN 360)
Homologated as a component for a type A system together with the
AOS01 (consult the specific manual) anchoring eyebolt along EN
795/A:2012, CEN/TS 16415:2013 and UNI 11578/A:2015
for inclined and horizontal timber, concrete and steel surfaces for 4
persons equipped with PPE as per EN 361 and with the following
fall protection systems as per EN 363:
• Restraint and positioning systems (EN 358)
• Guided type fall arresters including a flexible anchor line (EN 353-2)
• Lanyards (EN 354) with energy absorber (EN 355)
• Retractable fall arrest devices (EN 360)
In order to ensure safe use, please follow the indications provided for
each by the PPE manufacturer.
REGULATIONS
The manufacturer declares that the product TOWER is in conformity
with the standards EN 795:2012 type A+C, CEN/TS 16415:2013
TOWER 22
Notified body, TÜV Süd Product Service GmbH, Ridlerstr.65, 80339
München (test report no.: 713033865-1 / 713033865-100-5) and
UNI 11578:2015 tipo A+C.
The manufacturer declares that the product TOWER22 is in
conformity with the standards EN 795:2012 type A+C, CEN/
TS 16415:2013 Notified body, TÜV Süd Product Service GmbH,
Ridlerstr.65, 80339 München (test report no.: 713033865-2) and
UNI 11578:2015 tipo A+C.
The manufacturer declares that the product TOWERA2 is in
conformity with the standards EN 795:2012 type A+C, CEN/
TS 16415:2013 Notified body, TÜV Süd Product Service GmbH,
Ridlerstr.65, 80339 München (test report no.: 713033865-3) and
UNI 11578:2015 tipo A+C.
Rothoblaas TOWER - TOWER22 - TOWERA2 is an anchor device
made for inclined and flat timber, concrete and steel surfaces with or
without insulation. The device has been tested at 360° (as illustrated
below) on all related substrates.
FUNCTION
Rothoblaas TOWER - TOWER22 - TOWERA2 is an anchor device
designed to be installed on a statically tested substrate (e.g.: bearing
structure of roof) and is used as an anchor device for personal
protective equipment.
MATERIAL
Rothoblaas TOWER - TOWER22 is made of S235JR hot dip steel.
Rothoblaas TOWERA2 is made of 1.4301 / AISI 304 stainless steel.
TOWER - TOWERA2
23