Pioneer VREC-200CH Manual Del Usuario página 17

under the "DCIM" content of the TF card.
2. Use the manual recording function
long press the [OK Button] of the car black box for 1 second, and the car black
box will start and begin the automatically recording. Long press the [Power
Button] for 3 seconds to power off, and the car black box will automatically save
the recordings and power off.
3. Use the photographing function
Under the starting up status , shortly press the [Mode Button] to enter the
Photographing mode, the video camera icon displayed on the upper left corner
of the screen has been turned into a photographing camera, and shortly press
the [OK Button] for photographing. Shortly press the [Mode Button] for twice to
switch back to the video recording mode.
4. Collision induction function
There is a built-in collision inductor (G-sensor), and if there is a severe vehicle
collision, the car black box will lock the video at the time of the accident to save
as a special image, and meanwhile a lock icon will be displayed on the upper
screen. The locked image will not be circularly covered.
[Prompt] a. The locked video recording documents names will start as LOC and
the original recording documents will start as REC.
b. The collision inductor (G-sensor) supports the sensitivity control, and it can be
modified or set by you in the menu according to the actual need.
5. One-button for locking function
This device has the one-button for locking function, and can lock the images that
need to be saved without being circularly covered. Under the on-going status of
video recording mode, shortly press the [Menu Button] and the car black box
will lock the image.
6. Date and time setting
Under the standby status, shortly press the [Menu Button] to enter the system
setting menu, shortly press the [Up Button]/[Down Button] and move the cursor
16 / 24