Viking smrt-air-2 Manual Del Usuario página 3

7. Delete Users (Card and/or PINs)
1. Approach the programming card once to change into programming mode.
2. Approach the user card that wants to be deleted or its shadow card.
To delete a PIN enter a 4 to 6 digit PIN and press
completed. The escutcheon signals with the blue led when the digit has been entered correctly
3. When users are deleted, approach the programming card and the deleting process ends. If this is not
done, the escutcheon waits a few seconds, and then it finishes the process itself.
Instructions v5.0 – P-E04000_A_N. Shadow Progamming Cards
START: Approach a user card that can leave the door open
twice consecutively to the device (green light flashes) or
enter the PIN twice consequently (PIN +
finishes with the green light blinking
The escutcheon indicates with the blue led when the digit
has been entered correctly.
STOP: Approach a user card that can leave the door
open twice consecutively (green light flashing +
constant red light on) or enter PIN twice consequently
(PIN + ). Green light flashes the first time and the
second time, when the motor is closed, a red light will
be shown.
The escutcheon signals with the blue led when the digit
has been entered correctly.
: the red light blinks advising that the process has been
). The process
Standalone System