Installing Your Frame; Stacking Additonal Levels; Optional Configurations - ALDI SBX-ALD Manual Del Usuario

USA
Installation

Installing Your Frame:

Select the desired location
of your raised garden and
lay out the 4 timbers into a
square. Next, insert a stake
through each of the corner
brackets and hammer the
stake into the soil. (See
Image 3) If you are installing
your garden on cement or
other hard surface, you can use a hacksaw to remove the
spike from the stakes. Add a joint cap to each corner to finish.
Stacking Additional Levels:
For multi-level designs add a second or more raised garden
kit. Repeat Step 1 above then to secure the four corners,
slide a Joint Stake through the corner brackets into the top
of each corner stake of the level below. You can continue
stacking additional levels until reaching your desired height.

Optional Configurations:

Two Kits
(Single Layer)
8 x 8 ft. Square
(2.4 x 2.4 m)
4
support@frameitall.com
MODEL: SBX-ALD PRODUCT CODE:
10 x 10 ft. Octagon
(3 x 3 m)
3535 03/2017
3
Three Kits
(Double Layer)
7 x 8 ft. Hexagon
(2.1 x 2.4 m)
AFTER SALES SUPPORT
Raised Garden Bed
4 x 8 ft. Rectangle
(1.2 x 2.4 m)
1-800-914-9835
USA