Function Buttons - Domo DO327L Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
DO327L
PARTS
3
1. Seal
2. Sealing strip
3. Sealing ring (above and below)
4. Vacuum chamber
5. Air inlet
6. Unlocking button
1
6
6
5
3
4
2

FUNCTION BUTTONS

1
2
3
4
1. Vacuum&seal/cancel:
This button has 2 functions, depending on the status of the machine:
In "stand-by" mode: if you press the button now, the complete process of vacuum
packing and sealing will run automatically.
While operating the machine (vacuum packaging or closing of the packaging): if you
press the button now, the machine will stop operating.
2. Seal: this button has 2 functions
In order to seal the open end of a bag when you make bags from a film roll.
When the automatic "vacuum & seal" function is on, this button will switch the
vacuum pump off and immediately seal the packaging. In this way you can control
the vacuum pressure in a package, in order to prevent certain substances from being
flattened.
3. Pulse vacuum:
If you press this button, the vacuum pump is switched on. If you let the button go,
the vacuum pump will stop, allowing you to control the vacuum process optimally.
This can be repeated several times. Then the SEAL button can be used to seal the
packaging.
4. Food:
This button can be used to set the packaging time, depending on the food to be
packaged.
40

Publicidad

Tabla de contenido
loading

Tabla de contenido