Warranty; Maintenance; Repair And Metrological Verification; Cleaning - Metrix AX 501 Manual De Instrucciones

Chapter II
1.3.

Warranty

This equipment is guaranteed against any material or manufacturing defects, in accordance
w ith the general conditions of sale.
During the warranty period (3 years), the instrument can only be repaired by the
manufacturer, who reserves the right to repair the instrument or to exchange all or part of it. If
the equipment is returned to the manufacturer, the outgoing transport costs are borne by the
c ustomer.
T he warranty is not applicable in the following cases:
1. improper use of the equipment or use of it in conjunction with incompatible equipment
2. modifications to the equipment without the explicit authorisation of the manufacturer's
technical department;
3. work carried out on the instrument by a person not approved by the manufacturer;
4. adaptation for a specific application not included in the definition of the equipment or the
user's manual;
5. knocks, falls or flooding.
1.4.

Maintenance

1.4.1. R epair and metrological verification
Like all measuring or testing devices, a regular check is necessary.
Return your instrument to your distributor for any work to be done within or outside the
guarantee.

1.4.2. Cleaning

Disconnect the instrument and then clean it with a cloth slightly moistened with soapy water;
leave to dry before using. Never use abrasive products or solvents.

1.4.3. Storage

To guarantee correct operation of the power supply, after a period of storage in extreme
environmental conditions, wait for the instrument to return to normal measuring conditions
(see environmental specifications).
In particular, an abrupt change in the ambient temperature (cold to hot) may lead to
condensation inside the instrument and cause short circuits.
1.5. U npacking - Repacking
All the equipment has been checked both mechanically and electronically before shipment.
Every precaution has been taken to ensure that you receive the instrument undamaged.
However, it is a good idea to check quickly to detect any damage that may have occurred
during transport.
If there is any damage, immediately notify the transporter of the customary reservations.
Caution!
Note
Stabilized power supplies
If you ship this instrument on elsewhere, use preferably the original packaging
and indicate the reasons for reshipment as clearly as possible in a note
enclosed with the equipment.
Our products are patented in FRANCE and ABROAD. The logos are registered
trade marks. We reserve the right to modify the characteristics and prices
should technological advances make it necessary.
21