Address book (see also Address book chapter)
If the desired destination address is already in the address book or if it is
among the 20 most recently entered destinations, it can be easily accessed
as a destination address.
u
In the "Navigation" menu, select the function "Address book" and
press OK.
u
Select "Retrieve address" and press OK.
u
Select the address book category, e.g. using "Prev. destinations"
for the destination memory of the 20 most recent destinations.
Press OK.
u
Select the desired list entry. Press OK.
Selecting "Quit" in the list or pressing the left cursor key ( ) allows you
to leave the list display without accepting a list entry.
Destination entry via map
You can enter a destination via the Destination entry map by the
following means:
•
Cursors
•
Coordinates
Cursors
If the destination is not near the vehicle's position, first enter the
destination as accurately as possible using the keyboard (see Direct
address input).
u
In the "Navigation" menu, select the option "Destination map".
u
press a cursor key if you are already on the map display. The
destination entry map is displayed with cursors. If no destination
data were entered, the cursors show the current vehicle position.
Using the cursor keys , you can now move the cursor.
u
u
Press OK, select "Store" and press OK again so that the system will
accept the position as the destination.
t
First, select a large scale for a rough determination of the destination.
Then, select a smaller scale to mark your exact destination with the
cursors. Destinations in non-digitized areas are also selectable. When
positioning the destination on interstate highways, make sure you
select the lane for the correct direction.
NAVIGATION
27