Domo DO9139J Manual De Instrucciones página 41

www.domo-elektro.be
4. Push the squeezing screw firmly into the centre of the bowl, making sure that it
clicks into position, or else the cover will not close.
5. Position the cover on the bowl and twist it until the cover clicks shut, making sure
that the arrow on the motor block alignes with the line on the lid.
6. Position a measuring cup under the spout for the juice and a measuring cup under
the spout for the pulp. The machine is now ready for use.
Repeat these steps in reverse order when disassembling the machine.
Positioning of the sorbet accessory:
Make sure the plug is not in the outlet and that the on/off switch is turned off prior to
assembling the machine.
1. Position the bowl on the motor block. Make sure the bowl is mounted properly on
the axle of the motor block and twist the bowl so that the
2. arrows on the bowl and on the motor block are aligned.
3. Position the sorbet accessory on the motor block. Make sure the bowl is mounted
properly on the axle of the motor block and twist the bowl tight.
4. Push the squeezing screw firmly into the centre of the sorbet accessory.
5. Position the cover on the bowl and twist it until the cover clicks shut, making sure
that the arrow on the motor block alignes with the line on the lid.
41
DO9139J