Scansonic R4S Manual De Instrucciones página 16

Operating your radio - DAB
01 Carefully extend the telescopic antenna.
02 Press the MODE button to switch to DAB radio.
come into DAB mode automatically.
03 First time the radio is used a QUICK SCAN will be carried out, if the radio has been used
before the last used station will be selected.
04 For a new QUICK scanning press TUNE button briefly.
05 For a FULL SCAN press TUNE button 2 seconds – new stations may become available and a
full scan is recommended regularly.
06 When scanning is complete the display indicates the number of found stations.
07 Press and hold 1-3 buttons to save favourite stations.
08 SIGNAL N/A in display is shown because of weak station signal or antenna removed.
09 If no stations are found after scanning the display will show NO STATIONS AVAILABLE and it
is necessary to relocate the radio to a position giving better reception, or connect the radio to
your house antenna.
01 The display show the name of the station selected.
02 Turn the ROTARY KNOB to scroll the station list and find next station.
03 Press ROTARY KNOB to select the desired station.
16