Sound; Equalizer - Blaupunkt Melbourne SD27 Instrucciones De Manejo

Sound

For every source (radio, SD/MMC, CD
changer or AUX-IN), you can perform indi-
vidual and separate settings for the sound
(bass and treble) and the equalizer.
The settings for X-Bass and the volume dis-
tribution (balance and fader) are performed
jointly for all audio sources (except for traffi c
announcements and telephone/navigation
announcements).
Fader and balance can be adjusted for traf-
fi c reports and telephone calls/navigation
announcements only during the announce-
ment.
BASS BASS
Level Level -7 to +7 -7 to +7
(GAIN) (GAIN)
Frequency Frequency
(FREQ) (FREQ)
Quality fac- Quality fac-
tor (QFAC) tor (QFAC)
TREBLE TREBLE
-7 to +7 -7 to +7
– – – –
– – – –

Equalizer

This device features a digital 3-band equal-
izer. This equalizer allows for selecting one
frequency each for bass, treble and middle
and to adjust the level for the selected fre-
quency. In addition, you can adjust the qual-
ity factor for bass and middle.
Equalizer settings
The following table shows the bass, treble
and equalizer setting options in the "AUDIO"
menu. Some settings feature an "E" (for "EN-
HANCED"), e.g. "E-BASS". These settings are
performed in the "ENHANCED" submenu.
Note:
The table does not contain all the
settings that are possible in the menus
"AUDIO" and "ENHANCED".
Audio Audio
ENHANCED ENHANCED
E-BASS E-BASS E-TREBLE E-TREBLE
– –
60 Hz, 80 Hz, 60 Hz, 80 Hz, 10 kHz, 10 kHz,
100 Hz or 100 Hz or 12.5 kHz, 12.5 kHz,
200 Hz 200 Hz 15 kHz or 15 kHz or
17.5 kHz 17.5 kHz
1.0, 1.25, 1.5 1.0, 1.25, 1.5
or 2.0 or 2.0
Sound
E-MIDDLE E-MIDDLE
– – -7 to +7 -7 to +7
0.5 kHz, 0.5 kHz,
1.0 kHz, 1.0 kHz,
1.5 kHz or 1.5 kHz or
2.5 kHz 2.5 kHz
– – 0.5, 0.75, 1.0 0.5, 0.75, 1.0
or 1.25 or 1.25
21