SAFETY PRECAUTIONS
Before using the equipment, read the manual and pay particular attention to the
SAFETY MEASURES section.
The symbol
on the equipment means: "CONSULT THE USER MANUAL".
This may also appear in the manual as a warning or caution symbol.
WARNING and CAUTION messages may appear in this manual in order to avoid the risk of
accidents or to avoid causing damage to the equipment or to other property.
SAFETY MEASURES
• The non-specified use of the equipment does not ensure its safety.
• This equipment should only be using in systems or installation connected to a supply
line with the corresponding ground terminal.
• This equipment can be used in installations with Overvoltage Category II and in envi-
ronments with Pollution Degree 2.
• Always take the specified margins into account both for the powering as well as for
the measurements.
MAINTENANCE
• The user should only clean the equipment, the other maintenance work must be carried
out by specialised personnel.
• Do not use any cleaning products with aromatic hydrocarbons or solvents, these products
can harm the plastic elements of the housing.
• To clean the box, use a damp (with water) cloth only and if necessary, carefully use some
soap. Let the equipment dry completely before using it again.