Chapter Two - Using The Internet; Wired Network Setup; Wireless Network Setup - AIRIS KIRA Serie Manual De Usuario

Chapter Two - Using the Internet

Your KIRA Series OS supports both wired and wireless network. Before you
start surfing on the Internet, please follow the steps below to setup your
Internet connection.

2-1 Wired Network Setup

Before proceeding with the setup, please make sure the following:
1. One end of the network cable is properly plugged into your computer's
network adapter port;
2. Plug the other end of the cable into a Switch or Hub which is already part of
a LAN connected to the Internet.
LAN Network with Dynamic IP Allocation (DHCP)
KIRA Series' wired network is automatically set to on. If you are connected to a
LAN configured with dynamic IP allocation (DHCP), the Internet will connect as
soon as you have plugged in the cable.
If you are connected to a wireless network and wish to switch to a wired
network, firstly plug the network cable into the computer. Right click on
the network adapter icon as shown in Picture 2-1 then uncheck the
"Wireless Network" option.
Picture 2-1: Switching from wireless network connection to wired one.

2-2 Wireless Network Setup

The wireless network adapter is turned on by default at startup. If no wireless
network is detected, please firstly check if your wireless network access point
is turned on. To get a list of all the wireless networks your device has detected
left click on the wireless icon in the Tool Bar (see picture 2-2). Simply then click
on the network you wish to connect to.
11