Publicidad
Idiomas disponibles
Idiomas disponibles
7. If you leave the device switched on, the tray will keep the coffee warm after finishing brewing. The whole
working process will last 40 minutes. After 40 minutes the unit will be automatically shut off and stop
working. You can manually press the power switch again to switch on the appliance.
8. Always turn off the appliance and disconnect the power supply when not in use.
CAUTION! When pouring coffee from the jug, pour it slowly. Do not incline the jug suddenly in a large tilting
angle, in case the hot coffee flows out from the lid rim and hurt people. Do not put an empty jug back on the
hot warming tray.
Descaling:
Regularly descale the coffee maker. The intervals of descaling depend on the water hardness and frequency
of operation. In case of average water hardness we suggest descaling every 3 or 4 months. Please use a
commercially available decalcification agent.
Fill 400 ml of water into the reservoir and add the necessary amount of decalcification agent in accordance
with the dosing instructions.
Let the decalcification agent sink in the coffee maker for about one hour. Switch on the unit after one hour
and let the water pass through. After that you should brew water several times and rinse all detachable
components, in order to clean off any residue.
CLEANING AND MAINTENANCE
Before cleaning remove the mains plug and let the device cool down.
Never immerse the device in water. Please use a slightly damp cloth to clean the surfaces.
Clean all detachable parts after each use in hot, sudsy water. Avoid using acrid or scrubbing cleaning agents.
Use a damp cloth to gently wipe the warming tray. Never use abrasive cleaner to clean it.
Keep the coffee maker in a dry place out of reach from children when cooled off and cleaned.
Do not wrap the cord around the device.
RECYCLING
This product bears the selective sorting symbol for waste electrical and electronic equipment
(WEEE).
This means that this product must be handled pursuant to European Directive 2012/19/EU in
order to be recycled or dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the
environment and human heath due to the presence of hazardous substances.
QUALITY
Safety and quality is very important to HEMA. We have our own laboratory, which assesses all equipment in
terms of electrical safety and ease of use, before it is included in our range. HEMA also monitors the product
quality in collaboration with the manufacturer.
SECURITY
This HEMA item may be fitted with a plastic anti-theft strip. You will find the strip on the bottom of the product.
This strip does not influence the quality or the operation of the product and can be removed without a problem.
FAULTS AND REPAIRS
If this device needs to be repaired, you can hand it in at a HEMA branch after packing the product securely. Do
not try to repair this product yourself. For repairs that fall within the warranty period, you will need to show a
proof of purchase and the warranty document. Regularly check the power cord for damage. If there is any
damage to the cord set, please return the item to a HEMA branch for repair. Do not try to replace it yourself.
For safety reasons we recommend that you do not carry out any repairs to an electrical device yourself.
- 20 -
80.08.0007
Publicidad
