How To Set The Room Temperature For Some Hours Or Some Days (Holiday/Party Mode); Pre-Set Programs - Weinmann & Schanz E200 Manual De Instrucciones

6. How to set the room temperature for some hours or some days
(holiday/party mode)
In this mode, the temperature can be set for periods of time ranging from a few hours up to 199
days, e.g. when you are away from home for longer periods of time (holidays). The remaining hours/
days are shown. Time periods between 1 hour and 23 hours and 1 day and 199 days can be set.
How to activate this mode
Press the < button until the pointer indicates the suitcase icon.
Set the temperature
Select the time
Set the time
Once you have set your time period, the time will flash for 10 seconds and then start the holiday/
party period. To exit this mode, press < or >. When hours have been set, the controller will return
to AUTO mode once the set hours have passed. When days have been set, the controller will
return to AUTO mode at midnight of the last day.
Note: the current day (today) must be included in the setting.
e.g. 1 day is set; the controller returns to AUTO today at midnight.

7. Pre-set programs

There are 3 pre-set time/temperature programs which are already available in the controller. Pre-set
program 1 (as shown on page 37) is the default. Therefore, if pre-set program 1 is the best program
to suit your lifestyle, you do not need to change the time/temperature settings on the device.
To select an other program see 9.3
36
by pressing the + / – button
by pressing the < button
by pressing the + / – button
1 2 3 4 5 6 7
Man Auto Day