Operation - Use - Bestron AHD2200M Manual Del Usuario

operAtion - general information
The appliance is intended only for domestic use, not for professional use.
1. Concentrator nozzle
2. Cool Shot-function
3. Heat switch - -
4. On/off switch 0 - -
5. Grid
6. Hang up loop
7. Power cord and plug
operAtion - before the first use
1. Remove the packaging.
2. C lean all the accessories to remove any residues that may be left from the manufacturing process (see
"Cleaning and maintenance").
T he appliance may emit a little smoke and a characteristic smell when you switch it on for the first time.
This is normal and will stop on its own. Make sure there is sufficient ventilation.

operAtion - use

1. P lace the concentrator nozzle on the hair dryer (see figure 2).
2. Make sure that the on/off switch of the appliance is set to 0 (Off).
3. Insert the plug in the wall socket.
4. Put the on/off switch on . Or for a harder blow power on
5. Adjust the heat with the heat switch.
= cold
= tepid
= hot
• I n case of real wet hear, it is better to start with drying on a higher level. Switch the hair dryer on to
a less hot level as the hair become dryer.
• D ry your hair in front of the mirror is often a difficult task. Just try without looking in the mirror. Bend
your head a little bit forward so you can see what your doing. You will see, it works quite good!
• D on't put the mouthpiece too close to the hair
when the heat switch is on level III. This way
you can damage your hair.
6. U se the "cool shot" button to fixate the hair.
This function only works on positions and .
N ever close the back of the appliance. This way it
can overheat.
2.
1.
7.
.
19
EN
3.
4.
5.
6.