Getting Started; Helpful Hints - Twin Star 23IF1714 Manual De Instrucciones

1. Carefully use scissors or utility knife to cut and unwrap all parts.
2. Make sure that you have all the parts listed. If you are missing any parts please email
Customer Service: parts@twinstarhome.com or call 1-800-318-9373 in English,
1-800-318-9374 in French or 1-800-318-9374 in Spanish. Please identify the parts you
need and model number. Make sure to include your name and address.
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
• Some steps are more easily handled with two adults.
• When installing or removing the electric insert, move from the back of the fi replace so as
not to scratch the hearth/base.
• Use care in assembling your new fi replace, take your time and use the hardware
provided and a quality Phillips head screwdriver. Never over tighten bolts or screws.
• Do not sit on any part of the mantel.
Please read all "Electric Fireplace
Insert" instructions prior to installing
and removing Electric Insert in your
completed Fireplace Mantel.
CAUTION: unplug insert from
power supply before moving.
TO REMOVE INSERT
1. Loosen the screws from the metal
brackets holding the insert to the inside
of the mantel.
2. Carefully lift the insert out from the back
of the mantel, be careful not to slide the
insert across the hearth/base as it may
scratch your unit.
E-2

GETTING STARTED

CAUTION:

HELPFUL HINTS

CAUTION: do not plug insert into
power supply until the insert has
been completely installed and
mantel moved into its fi nal location.
TO INSTALL NEW INSERT
1. Lift insert carefully into the back of the
mantel and center in the insert opening. Do
not drag insert across Hearth/Base as it
may scratch your unit.
2. Install the mounting brackets to hold insert
fl ush against the inside of the mantel.
Move your completed unit only short
distances.
Move completed unit with great care.