Joycare SICUROFIX Manual De Instrucciones página 34

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

GB
5.2 Refitting the 5-point harness system and cover
• Press the adjustment device and pull the harness strap out off the strap
yoke to unlock it.
• After the above steps, pull the cover around
adjusting device down, and take the cover out from
the edge of adjusting device, then remove the
5-point harness system, headrest cover and shell
cover.
• After washing, place the cover on the shell, pull the
cover around adjusting device down and insert the
cover around the edge of adjusting device.
34
• Pull the shoulder strap axle out from the
gap of the shell. Then untie the shoulder
strap and pull it out from the harness
slots.
• Loosen the cover of seat base and push
the strap clip through the strap clip slot.
Then, take covers around both holders
out along the edge of holders as shown
in picture.

Publicidad

Tabla de contenido
loading

Tabla de contenido